skf YAR 210-2LPW/ZM Insert bearings (Y-bearings)

Dz:70 mm; A1:25 mm; S:8 mm; s1:15 mm; d:31.75 mm; Designation of bearing:US206-20G2T04; E:18 mm; Z:52.3 mm; Designation of open end cover:SCOU206-20; H2:83 mm;

s1:19.05 mm; L2:10 mm; d:31.75 mm; Recommended tightening torque for set screw:3.7 Nm; N1:16 mm; Designation of housing:T206N-; A5:22.2 mm; T max.:100 °C; Z:18.7 mm; SW:3.18 mm;

Max operating temperature, Tmax:120 °C; da max:81 mm; F:82.5 mm; Brand:SNR; Nlim:6,000 rpm; Characteristic inner ring frequency, BPFI:7.82 Hz; Mass (without HJ ring):2.28 kg; Fatigue limit load, Cu:23.3 kN; d:65 mm; r1a max:2 mm;

Bearing Locking Device:Eccentric Collar; Flinger Type:None; Expansion Type:Non-Expansion; Ball Grade:Class 10; Housing Coating:Powder Coat; Anti-Rotation Pin:Yes; Retainer Type:Std Retainer; Bearing Inner Ring Material:Steel; Max Bearing Speed:6500 rpm; Bearing Duty:Intermediate Duty;

Recommended tightening torque for set screw:11.5 Nm; d:35 mm; G:R1/8"; A:36 mm; s1:21.45 mm; J:92 mm; T min.:-20 °C; Designation of housing:FE207N-; C:25.7 kN; Dz:80 mm;

A:30 mm; J:70 mm; e:19 mm; C0:7.88 kN; Designation of housing:FE205-; S:14.3 mm; Recommended tightening torque for set screw:3.7 Nm; d:22.22 mm; A1:11 mm; G:R1/8";

d:47.62 mm; E:20 mm; C0:23.2 kN; Recommended tightening torque for set screw:16.8 Nm; Z:24.5 mm; Designation of bearing:UC210-30G2L4; S:19 mm; L1:33.5 mm; s1:25.8 mm; A1:34 mm;

D1:71.3 mm; ra max:1 mm; Characteristic outer ring frequency, BPF0:3.65 Hz; f0:14.2; Contact angle α:25 °; Fatigue limit load, Cu:2.22 kN; Precision class:P0; Da max:73.5 mm; Nlim:6,500 rpm; d:40 mm;

T max.:100 °C; T min.:-20 °C; S:11 mm; H:110 mm; E:24 mm; SW:3.97 mm; C:31.85 kN; s1:33.4 mm; B:30.2 mm; Weight:1.93 kg;

Brand:NTN; Min operating temperature, Tmin:-20 °C; Mass:0.008 kg; Characteristic outer ring frequency, BPF0:7.11 Hz; d:17 mm; Max operating temperature, Tmax:120 °C; da max:19 mm; Nlim (grease):24,000 rpm; Static load, C0:1.46 kN; ra max:0.3 mm;

Designation of housing:PH210-; H2:165 mm; Recommended tightening torque for set screw:11.5 Nm; Designation of bearing:US210G2T04; H1:22 mm; N1:25 mm; A:70 mm; J:159 mm; A1:36 mm; L1:65 mm;

C:31.85 kN; B:42.8 mm; Recommended tightening torque for set screw:8 Nm; s1:39.7 mm; e:22 mm; T min.:-20 °C; A:38 mm; A2:56.9 mm; S:21.4 mm; H:188 mm;

N:19mm; d:15 mm; H:89 mm; A1:12 mm; H2:51 mm; L:94 mm; Designation of bearing:SUC202; N2:32 mm; Designation of open end cover:SCO204-15; H1:76 mm;

N:M14; B:41.2 mm; G:M6x1; T min.:-20 °C; J:90 mm; H:54.2 mm; T max.:200 °C; Recommended tightening torque for set screw:11.5 Nm; Weight:2.15 kg; C:31.85 kN;

Dynamic load, C:345 kN; Radial clearance class:C3; Category:Cylindrical Roller B; Min operating temperature, Tmin:-40 °C; Snap Ring:No; db min:184 mm; Minimum Buy Quantity:N/A; Inventory:0.0; Mass (without HJ ring):11.2 kg; r1s min:3 mm;